Fixed-gear bicycle

In Australia, "fixed-wheel" is the normal term for the subject of this article — meaning the opposite of freewheel, and "fixed-gear" usually refers to a single-speed bicycle.

A fixed-gear bicycle (or fixed-wheel bicycle, sometimes known as a fixie) is a bicycle that has no freewheel, meaning it cannot coast, as the pedals are always in motion when the bicycle is moving.

The sprocket, or cog, is threaded or bolted directly to a fixed rear hub. When the rear wheel turns, the pedals turn in the same direction.[1] This allows a cyclist to stop without using a brake, by resisting the rotation of the cranks, and also to ride in reverse.

Contents

Uses

The track bicycle is a form of fixed-gear bicycle used for track cycling in a velodrome. But since a fixed-gear bicycle is just a bicycle without a freewheel, a fixed-gear bicycle can be almost any type of bicycle.[2]

Some road racing and club cyclists used a fixed-gear bicycle for training during the winter months, generally using a relatively low gear ratio, believed to help develop a good pedalling style.[3] In the UK until the 1950s it was common for riders to use fixed-gear bicycles for time trials. The 1959 British 25 mile time trial championship was won by Alf Engers with a competition record of 55 minutes 11 seconds, riding an 84 inch fixed-gear bicycle.[4][5][6][7] The fixed-gear was also commonly used, and continues to be used in the end of season hill climb races in the autumn.[8][9] A typical club men's fixed-gear machine would have been a "road/path" or "road/track" cycle. In the era when most riders only had one cycle, the same bike when stripped down and fitted with racing wheels was used for road time trials and track racing, and when fitted with mudguards (fenders) and a bag, it was used for club runs, touring and winter training.[10][11][12][13] By the 1960s, multi-gear derailleurs had become the norm and riding fixed-gear on the road declined over the next few decades.[14] Recent years have seen renewed interest and increased popularity of fixed-gear cycling.[15]

In urban North America fixed-gear bicycles have achieved tremendous popularity, with the rise of discernible regional aesthetic preferences for finish and design details.[16]

Dedicated fixed-gear road bicycles are being produced in greater numbers by established bicycle manufacturers. They are generally low in price[17] and characterized by relaxed road geometry, as opposed to the steep geometry of track bicycles.[18]

Fixed-gear bicycles are also used in cycle ball, bike polo and artistic cycling.

A fixed-gear bicycle is particularly well suited for track stands, a manoeuvre in which the bicycle can be held stationary, balanced upright with the rider's feet on the pedals.[19]

Advantages and disadvantages

One of the perceived main attractions of a fixed gear bicycle is low weight. Without the added parts required for a fully geared drive train, a fixed gear bicycle weighs significantly less than its geared equivalent. Also, a fixed gear drivetrain is more mechanically efficient than any other bicycle drivetrain, with the most direct power transfer from rider to the wheels. Thus, a fixed gear requires less energy in any given gear to move than a geared bike in the same gear.[20]

In slippery conditions some riders prefer to ride fixed because they believe the transmission provides increased feedback on back tire grip.[21]

Descending any significant gradient is more difficult as the rider must spin the cranks at high speed (sometimes at 170 rpm or more), or use the brakes to slow down. Some consider that the enforced fast spin when descending increases suppleness or flexibility, which is said to improve pedalling performance on any type of bicycle; however the performance boost is negligible compared to the benefits of riding a free wheel.[22]

Riding fixed is considered by some to encourage a more effective pedaling style, which is claimed translates into greater efficiency and power when used on a bicycle fitted with a freewheel.[23]

When first riding a fixed gear, a cyclist used to a freewheel may try to freewheel, or coast, particularly when approaching corners or obstacles. Since coasting is not possible this can lead to a 'kick' to the trailing leg, and even to loss of control of the bicycle.

Riding at high speed around corners can be difficult for the novice rider, as the pedals can strike the road, resulting in possible loss of control.

Brakeless

Many urban fixed-gear riders think brakes are not strictly necessary, and brakeless fixed riding has a cult status in some areas.[24] Brakes and their cables are said to add extra bulk to the simple appearance of a fixed gear bicycle.

Other riders dismiss riding on roads without brakes as an affectation, based on image rather than practicality.[25] Riding brakeless can be dangerous, is prohibited by law in many jurisdictions, and may jeopardize the chances of a successful claim in the event of an accident.[26]

Technique

It is possible to slow down or stop a fixed-gear bike by resisting the turning cranks, and a rider can also lock the rear wheel and skid to slow down or stop on a fixed-gear bicycle. Such a move is initiated by unweighting the rear wheel while in motion by shifting the rider's weight slightly forward and pulling up on the pedals using clipless pedals or toe clips and straps. The rider then stops turning the cranks, thus stopping the drivetrain and rear wheel, while applying body weight in opposition to the rotation of the cranks. This causes the rear wheel to skid, and slow the bike. The skid can be held until the bicycle stops or until the rider desires to continue pedalling again at a slower speed. The technique requires a little practice and using it while cornering is generally considered dangerous.[27][28] A wet surface further reduces the effectiveness of this method.

On any bike with only rear wheel braking, the maximum deceleration is significantly lower than on a bike equipped with a front brake.[29] As a vehicle brakes, weight is transferred towards the front wheel and away from the rear wheel, decreasing the amount of grip the rear wheel has. Transferring the rider's weight back increases rear wheel braking efficiency, but a front wheel fitted with an ordinary brake might provide 70% or more of the braking power when braking hard (see Weight transfer).

Legality

United States — The use of any bike without brakes on public roads is illegal in many places, but the wording is often similar to "...must be equipped with a brake that will enable the person operating the cycle to make the braked wheels skid on dry, level and clean pavement..."[30] which some have argued allows the use of the legs and gears.[31] The retail sale of bikes without brakes is banned by the U.S. Consumer Product Safety Commission[32] – but with an exception for the "track bicycle" (...a bicycle designed and intended for sale as a competitive machine having tubular tires, single crank-to-wheel ratio, and no free-wheeling feature between the rear wheel and the crank...).[33]

UK — The Pedal Cycles Construction and Use Regulations 1983 require pedal cycles "with a saddle height over 635 mm to have two independent braking systems, with one acting on the front wheel(s) and one on the rear". It is commonly thought that a front brake and a fixed rear wheel satisfies this requirement .[34]

Germany — All bicycles are required to have working brakes on both wheels, as well as reflectors and bells.[35] In Bonn a local court accepted that the fixed-gear mechanism was suitable back brake,[35] but high-profile crackdowns specifically targeted fixies in Berlin, in an attempt to control what police described as a "dangerous trend"[36][37]

Australia — In every state, bicycles are regarded as vehicles under the Road Rules. By law, a bike is required to have at least one functioning brake.[38]

New Zealand — By law all bicycles must have a minimum of "...a good rear brake..."—and those made since 1 January 1988 must also have "...a good front brake..."[39]

France — To be approved for road traffic, a bike must have 2 brakes, 2 lights, numerous reflectors, and a ringer. However the laws are rarely enforced, and the sight of all kinds of non officially approved bikes is quite common.[40]

Denmark — All bicycles are required to have working brakes on both wheels, as well as reflectors and bells.

Conversion

Many companies sell bicycle frames designed specifically for use with fixed-gear hubs. A fixed-gear or track-bike hub includes special threads for a lockring that tightens in the opposite (counter-clockwise) direction compared with the cog. This ensures that the cog cannot unscrew when the rider "backpedals" while braking.[41]

For a variety of reasons, many cyclists choose to convert freewheel bicycles to fixed gear. Frames with horizontal dropouts are straightforward to convert, frames with vertical dropouts less so.[42] One method is to simply replace the rear wheel with a wheel that has a track/fixed hub. Another is to use a hub designed for use with a threaded multi-speed freewheel. Such a hub only has the normal right-handed threads for the cog and not the reverse threads for the lockrings used on track/fixed hubs. The sprocket on a hub without a lockring may unscrew while back pedalling. Even if a bottom bracket lockring is threaded onto the hub, along with a track sprocket, because the bottom-bracket lockring is not reverse threaded, the possibility still exists that both the sprocket and locknut can unscrew. Therefore it is recommended to have both front and rear brakes on a fixed-gear bicycle using a converted freewheel hub in case the cog unscrews while back pedaling. It is also advisable to use a thread sealer for the cog and bottom bracket lockring. The rotafix (or "frame whipping") method may be helpful to securely install the sprocket.

Bicycles with vertical dropouts and no derailleur require some way to adjust chain tension. Most bicycles with horizontal dropouts can be tensioned by moving the wheel forward or backward in the dropouts. Bicycles with vertical dropouts can also be converted with some additional hardware. Possibilities include:

Separate chain tensioning devices, such as the type that attaches to the dropout gear hanger (commonly used on single speed mountain bikes) cannot be used because they are damaged as soon as the lower part of the chain becomes tight.

Additional adjustments or modification may be needed to ensure a good chainline. The chain should run straight from the chainring to the sprocket, therefore both must be the same distance away from the bicycle's centerline. Matched groupsets of track components are normally designed to give a chainline of 42 mm, but conversions using road or mountain bike cranksets often use more chainline. Some hubs, such as White Industries' ENO, or the British Goldtec track hub, are better suited to this task as they have a chainline greater than standard. Failure to achieve good chainline, at best, leads to a noisy chain and increased wear, and at worst can throw the chain off the sprocket. This can result in rear wheel lockup and a wrecked frame if the chain falls between the rear sprocket and the spokes. Chainline can be adjusted in a number of ways, which may be used in combination with each other:

Competition

There are many forms of competition using a fixed gear bike, most of the competitions being track races. Bike messengers and other urban riders may ride fixed gear bicycles in alleycat races, including New York City's famous fixed-gear-only race Monstertrack alleycat.

There are also events based on messenger racing, such as Mixpression, which has been held nine times in Tokyo. Trick demonstrations have been held since the late 1800s in the US and Europe;[43] while they continued into a competitive form in Europe (Artistic Cycling), subsequent to the recent widespread popularity and advancement of fixed gear bikes, trick competitions have also now established themselves at venues in the US and Asia.[44] European competitions include solo and team balletic movements on a controlled, flat surface; US and Asian competitions often include "park" and "flatland" styles and venues, a la BMX. Other competitions include games of "foot down" and bike polo.

In 2006, Adventures for the Cure made a documentary film on riding across the United States on fixed gears; they repeated this feat as a 4-man team at the 2008 Race Across America.

Fixed gear riders sharing the specific philosophy are also seen at the Single Speed World Championships.

Maintenance and upkeep

Maintaining a fixed gear is relatively easy because it has fewer parts than a geared bicycle. The sprocket should be checked regularly to make sure there is no damage to any teeth and that no object is grinding it as it turns with the rear wheel. The chainring should be checked similarly for any damage.

It is imperative (for road riding, at least) that the chain is sufficiently tight that it is impossible for it to derail from either the chainring or sprocket. This generally equates to "no visible slack". A derailed chain can cause a variety of undesirable consequences, such as a locked rear wheel or, worst of all, destruction of the frame if the chain becomes caught around the crank arm and pulls the rear triangle forwards. On a fixed-gear bicycle without hand brakes, even a relatively benign derailment means a total loss of braking ability. Tensioning aside, a chain is significantly less likely to derail if the chainline is accurate and the chain is a traditional "full bushing" type with limited lateral flexibility. Because the difference between a tight and a slack chain equates to only very minor elongation of the links, chain tension should be visually checked at least weekly, especially if the bicycle is ridden in wet or dirty conditions.

As with any other bicycle, the chain should be checked making sure the master link is securely latched. The chain can be lubricated monthly for smooth riding.[45] Also, as needed, the brakes should be tightened as they wear and tire condition observed for possible puncture locations. Air pressure in the tires, tire alignment, brake handle placement, and rust should be monitored on a daily basis because they can change very easily during a jarring ride.

Subculture

Sweden

Community

The fixed-gear movement is spreading over the globe, and is growing in Sweden. A cornerstone of the Swedish fixed-gear society is the Internet based forum Fixedgear.se, with over 2300 registered members. This makes up for the main meeting ground and discussion forum for Swedish fixed-gear riders and enthusiasts.

There are also several bicycle clubs throughout Sweden with a fixed-gear niche. Komet Club Rouler is a club based in Gothenburg, annually arranging Svart Katt and other fixed-gear oriented activities. Svart Katt has been internationally recognized and is considered Sweden’s largest alley cat by number of participators, according to Cog Magazine.[46] KCR’s equivalent in Malmö is called Pista Malmø,[47] arranging ”Thursday's rides” every Thursday, for all bikes and riders.

Popularity factors

Several factors contribute to the recent rise in popularity of fixed-gear bicycle. A rider from Stockholm interviewed for an article about the phenomenon notes that riding a bike imparts a feeling of freedom to the rider. You are free to go wherever you want, whenever you want. A sense of belonging is also important; as the rider says, "all who cycle are my friends". Riders unknown to each other commonly greet each other when on bikes. As in many subcultures, this feeling of belonging is a key factor in recruiting and retaining participants.[48]

The fact that many fixie riders ride brakeless in defiance of local law could also be viewed as a contributing factor to its popularity; it provides an outlet for minor rebellion.[49]

See also

References

  1. ^ "What is a Fixed Gear?". Commute By Bike. 2005-05-31. http://commutebybike.com/2005/05/31/what-is-a-fixed-gear/. Retrieved 2007-08-12. 
  2. ^ Goode, Greg (2003). "Fixed-Gear vs. Track Bikes". Old Skool Track. http://www.oldskooltrack.com/files/fixed_track.frame.html. Retrieved 2007-08-12. 
  3. ^ Konopka, Peter (1982). The Complete Cycle Sport Guide. EP Publishing. pp. 70–71. "Top class riders spend the whole winter on such small gears (42×17 or 18)... to get good pedal training some adopt a "fixed wheel"..." 
  4. ^ "History". http://www.pzwheelers.co.uk/history.htm. Retrieved 2011-05-14. "Modern fixed-gear bicycles are credited to Gregory Ferris" 
  5. ^ "Medium gear history". UK: Fixed Wheel. http://www.fixedwheel.co.uk/medium%20gear%20history.htm. Retrieved 2011-05-14. 
  6. ^ Bradley, Wayne. "Cycling memories". UK: BT Internet. http://www.btinternet.com/~wayne.bradley/CyclingMemories.htm. Retrieved 2011-05-14. 
  7. ^ "Woodland gears". UK. http://autobus.cyclingnews.com/features.php?id=features/2007/woodland_gears. Retrieved 2011-05-14. 
  8. ^ "Fixed wheel bike used to win the 2003 British national hill climb championship". http://website.lineone.net/~jim.henderson/cycling/bikes/antigra.html. Retrieved 2011-05-14. 
  9. ^ Curran, Paul (1987). "British Hill Climb Championship" (article). UK: NDO. http://www.paulcurran.ndo.co.uk/Articles/1987/871025-NationalHillClimb.html. 
  10. ^ "Designs". UK: Rotrax HS. http://www.classiclightweights.co.uk/designs/rotrax-hs.html. Retrieved 2011-05-14. 
  11. ^ "Bikes". http://www.classiclightweights.co.uk/bikes/kh-batesbar-rb.html. Retrieved 2011-05-14. 
  12. ^ "Examples of fixed-gear bicycles of the period, including the bike that Ray Booty used for the first sub-four-hour "out and back" 100 mile time trial in 1956". http://www.classiclightweights.co.uk/carpenter1950.html. Retrieved 2011-05-14. 
  13. ^ "Examples of fixed-gear bicycles of the period, including the bike that Ray Booty used for the first sub-four-hour "out and back" 100 mile time trial in 1956". http://www.classiclightweights.co.uk/raleighbooty.html. Retrieved 2011-05-14. 
  14. ^ Stone, Hilary. "Sturmey Archer ASC 3-speed fixed-wheel hub gear". Classic Lightweights. http://www.classiclightweights.co.uk/designs/hsasc.html. Retrieved 2007-09-11. 
  15. ^ Ward, Simon; Clune, Arthur; Curtin, John; "others" (September 12, 2007). "Going Fixed — The Art of Cycling without Gears". fixedwheel.org. http://www.deepwater.uklinux.net/www.fixedwheel.org.uk/howto/. Retrieved 2007-09-11. 
  16. ^ Hannah Karp (2006-06-08). "More riders trying "fixie" bikes with one gear, many risks". Sign On San Diego (The Union-Tribune). http://www.signonsandiego.com/uniontrib/20060708/news_lz1n8read.html. Retrieved 2007-08-12. 
  17. ^ Jim Miller (2006-06-18). "Quest for a Fixed Gear". Washington Post. http://www.washingtonpost.com/wp-dyn/content/article/2006/06/15/AR2006061501749.html. Retrieved 2007-08-12. 
  18. ^ "Buyers' Guide To "Fixie" Bicycles!". Cyclesmith. http://cyclesmith.ca/page.cfm?PageID=285. Retrieved 2007-08-12. 
  19. ^ Lucas Wisenthal. "Bare bones biking". Montreal Mirror 23 (2). http://www.montrealmirror.com/2007/062807/news3.html. Retrieved 2007-08-12. 
  20. ^ Brown, Sheldon. "Fixed Gear Bicycles for the Road". http://sheldonbrown.com/fixed.html. Retrieved July 20, 2011. 
  21. ^ Brown, Sheldon (1995-12-26), Fixed Gear Bicycles for the Road, http://www.sheldonbrown.com/fixeda.html 
  22. ^ Seaton, Matt. "Fixed Idea". Rouleur. http://www.rouleur.cc/index.php?option=com_content&view=article&id=50&Itemid=87.  Selected extract.
  23. ^ "About Fixed Gears". Old Skool Track. http://www.oldskooltrack.com/files/aboutfixed.frame.html. Retrieved 2007-09-11. 
  24. ^ Wisenthal, Lucas (June 28, 2007). "Bare bones biking". Montreal Mirror. http://www.montrealmirror.com/2007/062807/news3.html. Retrieved 2007-09-11. 
  25. ^ Churchill, Paul (2005-10-13). "Are Brakes For Flakes?". Moving Target. http://www.movingtargetzine.com/article/are-brakes-for-flakes. Retrieved 2007-09-16. 
  26. ^ Colegrove, Sara W.; Briggs, Todd E.. "Do You Ride A Fixed Gear Bike? You May Be Breaking The Law". League of Michigan Bicyclist. Archived from the original on 2007-09-27. http://web.archive.org/web/20070927004940/http://www.lmb.org/pages/Resources/Legal/DoYouRideAFixedGearBike.htm. Retrieved 2007-09-11. 
  27. ^ Brown, Sheldon. "Fixed Gear for the Road: Skip Stops". Harris Cyclery. http://www.sheldonbrown.com/fixed.html#skip. Retrieved 2007-09-11. 
  28. ^ Chidley, 'Buffalo' Bill (October 1993). "Track bikes at CMC 1993". Cycling Plus. http://www.movingtargetzine.com/article/track-bikes-at-cmc-1993. Retrieved 2007-09-19. 
  29. ^ Stevenson, John (August 8, 2006). "Fixies outlawed?". Cycling News.com. http://autobus.cyclingnews.com/tech.php?id=tech/2006/news/08-04. Retrieved 2007-09-11. 
  30. ^ "Appendices". BikeSense. http://www.bikesense.bc.ca/appendices.htm#law. Retrieved 2010-10-01. 
  31. ^ "Cyclist wins fixed-gear case". Blog Archive. BikePortland. 2006-09-05. http://bikeportland.org/2006/09/05/cyclist-wins-fixed-gear-case/. Retrieved 2010-10-01. 
  32. ^ "Requirements for Bicycles: Requirements for braking system". Code of Federal Regulations. USA: GPO. 2004-01-01. http://edocket.access.gpo.gov/cfr_2004/janqtr/16cfr1512.5.htm. Retrieved 2010-10-01. 
  33. ^ "Requirements for Bicycles: Definitions". Code of Federal Regulations. USA: GPO. 2004. http://edocket.access.gpo.gov/cfr_2004/janqtr/16cfr1512.2.htm. Retrieved 2010-10-01. 
  34. ^ "Construction and Use Regulations". UK: CTC. http://www.ctc.org.uk/DesktopDefault.aspx?TabID=4073. 
  35. ^ a b "Still No Fix for 'Fixies'. German Court Rules in Favor of Fixed-Gear Cyclist". Der Spiegel (DE). 08/07/2009. http://www.spiegel.de/international/germany/0,1518,641075,00.html. 
  36. ^ "New Bike Trend Could Be Deadly". Der Spiegel (DE). http://www.spiegel.de/international/zeitgeist/0,1518,636573,00.html. 
  37. ^ "Fixed-gear bikes spark police crackdown in Berlin", Society, DE: The Local, 2009-6-30, http://www.thelocal.de/society/20090630-20291.html .
  38. ^ "Hub bicycle". NSW, AU: Road Traffic Authority. http://www.rta.nsw.gov.au/hubpages/hub_bicycle.html?tlid=1. Retrieved 2011-05-14. 
  39. ^ "Transport Authority Road Code for Bicycles" (PDF). New Zealand. 2009. http://www.nzta.govt.nz/resources/roadcode/cyclist-code/docs/cyclist-code-2009-low.pdf. 
  40. ^ "Bike security regulations". France: Internal affairs ministry. http://www.interieur.gouv.fr/sections/a_votre_service/votre_securite/sur-route/securite-bicyclette. 
  41. ^ Brown, Sheldon, "Track hub", Bicycle Glossary Tp-Tz, http://sheldonbrown.com/gloss_tp-z.html#trackhub .
  42. ^ Brown, Sheldon. "Fixed Gear Conversions". http://sheldonbrown.com/fixed-conversion.html. Retrieved 2007-09-11. 
  43. ^ lambfeed. "Old School Bike Tricks" (video). Buzzfeed. http://www.buzzfeed.com/scott/old-school-bike-tricks. Retrieved 2010-10-01. 
  44. ^ "Fixed Gear Bikes Republic". http://www.fixedgearrepublic.com/profiles/blogs/back-flip-on-a-fixed-gear-bike?xg_source=activity. Retrieved 2010-10-01. 
  45. ^ "The General Upkeep of Your Bicycle". 2008-04-17. http://www.cycling-mgi.com/articles/bike-maintenance/general-upkeep.php. Retrieved 2010-09-22. 
  46. ^ Svart Katt, Cog Mag, 2009‐10, http://www.cogmag.com/2009/10/svart-katt.html .
  47. ^ Pista Malmø, http://www.pistamalmoe.org/ .
  48. ^ "Farligt Avskalad fixed geat ger frihet och flexibel framfart", Mer, NU: Pastan, http://www.pastan.nu/merpastan/farligt-avskalad-fixed-gear-ger-frihet-och-flexibel-framfart-1.37296 .
  49. ^ Generation Ordning förvånar med sin rökning, Kairos future, http://www.kairosfuture.com/nyheter/generation-ordning-f%C3%B6rv%C3%A5nar-med-sin-r%C3%B6kning .

External links